Equally Impressive: Maersk Discoverer drills in shallow waters

Did you know that on a deep water rig it is just as challenging to drill in shallow water as in very deep water?

Equally Impressive: Maersk Discoverer drills in shallow waters

On 2 October 2017, Maersk Discoverer moved the boundaries for drilling in shallow waters when successful drilling operations commenced in 285 meters water depth. This is the shallowest water drilling operation in Dynamic Positioning mode ever conducted for both Maersk Drilling and for client BP, and constitutes another operational highlight for Maersk Drilling.

“Well done to everyone involved with this operation,” says Angela Durkin, COO of Maersk Drilling. “This is another example of achieving operational excellence by working together across departments within Maersk Drilling.”

In 2015, BP asked Maersk Drilling if it was possible for Maersk Discoverer to drill a well in only 408 meter water depth. Normally, Maersk Drilling’s Deepwater D rigs are designed to operate in water depths as shallow as 460 meters and as deep as 3050 meters in Dynamic Positioning mode.

The gain for the client was that it would save costs and rig time associated with mooring. After a suitable risk assessment, the well was safely and efficiently drilled, completing the 408 meter operation.

A greater challenge

After this success, BP returned with an even greater challenge: Drill a well in 285 meter water depth in Dynamic Positioning mode.

“Initially, it seemed too great a challenge,” says Allan McColl, Rig Leader on Maersk Discoverer. “It was paramount that we ensured safe operations, even in such shallow waters.”

To assess the risk of the operation, McColl and his local Cairo rig team enlisted the support of Technical Organisation. “After working closely with our Technical Organisation, we were able to return to the customer with the good news that we could in fact drill the well.”

The second phase: Ensuring Safe Execution

But then the client added another challenge: Drilling in Dynamic Positioning mode in 285 meter water depth with a window of time that covered the highest number of months possible.

With further TO support, and with detailed analysis of conditions, it was established that drilling operations would be possible in the months of May through October. To verify this conclusion, a major risk assessment, facilitated by the TO Technical Safety Department, was begun. “In the end ,” says McColl, “the proper risk management steps ensured us of a successful outcome.”

The result: A happy customer

The operation can now report that the well has been successfully drilled with no non-productive time associated with rig positioning. The rig left location on 15 October and moved on to drill in comparatively deep water, with a depth of 388 meters.

“But the story does not quite end there,” says McColl, and stresses the importance of the money saved for the client. “We have saved our customer time and money by operating in Dynamic Positioning mode, compared to mooring the rig to drill and run completions on three wells. That is something we can be proud of. This cooperation has moved boundaries within our business – and, on top of that, produced a happy customer.”


Kristoffer Apollo
Kristoffer Apollo
Head of Media Relations

Read more

Maersk Resolute 2021
Project Greensand receives Danish government funding
The drilling industry at a crossroads
Are North Sea operators walking the talk on supply chain collaboration?
Managing Innovation in a Cyclical Industry
Morten Kelstrup with tie_Wide.jpg
The Time to Act is Now