Mærsk Innovator - Specifications


Year of Construction: 2003
Class: Det norske Veritas
Work area: North Sea
Hull dimension: 88.8 m x 102.5 m x 12 m (291 ft x 336 ft x 39 ft)
Length of legs: 205.3 m (673 ft)
Rated water depth: 150 m (492 ft)
Rated drilling depth: 9,144 m (30,000 ft)
Variable load: 10,000 t including hook load
XY cantilever reach: 27.5 m x 20 m (90.2 ft x 65.6 ft)
Power supply: 4 MAN-B&W Holeby 9L27/38
Well control equipment: 15,000 psi
Cranes: 3 Kenz EHC 100/3500 OS
Cement pump: 15,000 PSI (on free placement)
Hoisting equipment capacity: 2,000,000 lb (hook load static)
Drawworks: 1 Varco AHS-10Q, 4,600 hp
Top drive: 1 Varco TDS-8SA
Mud pumps: 3 Wirth TPK 2200, 1 Wirth TPK 800
Bulk mud capacity: 250 m³ (8,829 ft³)
Bulk cement capacity: 250 m³ (8,829 ft³)
Liquid mud capacity: 6,793 bbl, holding 3,000 bbl, slurry 1,887 bbl
Accommodation: 120 people

DISCLAIMER: This text is for promotional purposes only. All descriptions, specifications and other information contained in this text and/or in any accompanying material is: (i) intended to give only a general indication of the sorts of service or equipment or performance that might be available (ii) intended to be no more than an invitation to treat (iii) subject to contract and possible change or alteration at our discretion and without notice to you (iv) not to be relied upon by you for any purposes whatsoever when entering into any legally binding agreement with us.